Don’t know what hose you need?
Neither do we — until you bring it in.

That’s not a problem. It’s the whole service. Most people who walk into our Arcadia shop are holding a hose that blew an hour ago and have no idea what’s printed on it. We will take it from there.

Step 1 — Bring us the broken hose Cut it off the machine and bring the whole failed assembly, fittings and all. No part number, no spec sheet, no measurements needed.

Step 2 — We will identify and match it We read the hose, identify the fitting type and thread, measure the length and confirm the pressure rating for your application.

Step 3 — We will build the replacement Crimped, pressure-tested and handed across the counter — most standard assemblies while you wait.

Callout box: Bringing the old hose is the fastest path. A photo or a measurement usually leaves questions open — thread type, hose ID, working pressure. The failed part answers all of them at once. If the equipment can’t be moved, call us at (626) 310-1626 and we’ll talk you through what to bring.

Hose assemblies for the equipment that runs the San Gabriel Valley

Hydraulic hose failure stops the machine, and usually the crew with it. We build replacement assemblies for the equipment our neighbors actually operate:

• Forklift hydraulic hose — mast, tilt and side-shift lines for warehouse and yard fleets
• Excavator hydraulic hose — boom, arm, bucket and auxiliary circuits
• Skid steer hydraulic hose — loader arms, attachments and quick-couple lines
• Backhoe & tractor hydraulic hose — loader, three-point and remote circuits
• Dump truck hydraulic hose — hoist and PTO lines built to working pressure
• Pressure washer hose repair — high-pressure lines, wands and replacement couplers
• Air compressor hose repair — shop air lines, whips and Chicago-style fittings
• Industrial & process hose — water, chemical, suction, discharge and material handling

Custom hydraulic hose assemblies · Hydraulic hose replacement · Hydraulic hose fittings · Same-day hose builds · Adapters & couplers · Crimped & field-attachable ends · Hose reels · Clamps & fasteners

Broken hose → Hose King → back to work.

When a rental unit comes back with a damaged hose, that machine isn’t earning until the line is replaced. Send the hose to Goldring Road. We’ll identify it, build the replacement and get the unit back into your rental fleet.

The same applies to anyone running equipment on a schedule — forklift fleets, construction crews, landscape and grading contractors, fleet maintenance shops and equipment repair operations across the SGV.

Set up a shop account

If you’re replacing hoses regularly, an account gets your crews served faster at the counter and keeps your assemblies on record for repeat builds. Call (626) 310-1626.

Serving the San Gabriel Valley industrial corridor

Our Arcadia counter on Goldring Road sits in the middle of the SGV’s working corridor. If your equipment is down anywhere along it, you’re minutes away:

Arcadia · Monrovia · Duarte · Irwindale · El Monte · Azusa

We also serve Temple City, Pasadena, Baldwin Park, Rosemead, San Gabriel, Sierra Madre, Covina, West Covina, Glendora, San Dimas and Bradbury. Our second location in Commerce covers Central and Southeast Los Angeles.

Why Hose King Arcadia

• Over 60 years in hose — family owned, and still built on knowing the product rather than looking it up
• Built on site — assemblies crimped and tested at our Arcadia counter, not ordered in
• No part number required — bring the failed hose. Identification is part of the job
• Walk-ins welcome — no appointment, no account needed to be served
• Deep inventory — hose, fittings, adapters and clamps stocked for common builds
• Two locations — Arcadia for the SGV, Commerce for Central and Southeast LA

Common questions

Can you make a hydraulic hose while I wait? Yes. Most standard hydraulic assemblies are built at our Arcadia counter while you wait. Bring the failed hose so we can match the fittings and length. Larger, specialty or high-pressure builds may take longer — call (626) 310-1626 and we’ll tell you before you drive over.

What do I need to bring to get a hose replaced? Bring the entire failed assembly, including both fittings. You do not need a part number, a measurement or the equipment manual. If the hose can’t be removed from the machine, call us and we’ll tell you what to photograph and measure.

My hydraulic hose blew — can you match it if the printing is worn off? Usually, yes. Even with the layline worn away, we can identify hose by construction, inside diameter, reinforcement and fitting type, then confirm the working pressure your application needs.

Do you build hoses for forklifts, excavators and skid steers? Yes — forklifts, excavators, skid steers, backhoes, tractors, dump trucks and most other hydraulic equipment. Bring the failed line and we’ll build the replacement.

Do you repair pressure washer and air compressor hoses? Yes. We build and repair high-pressure washer lines, shop air hose, whip hoses and the couplers and fittings that go with them.

Where is Hose King in Arcadia? 11605 Goldring Rd, Suite D, Arcadia, CA 91006 — in the Goldring Road industrial area, minutes from Monrovia, Duarte and Irwindale.

Do I need an account or an appointment? No. Walk-ins are welcome and anyone can be served at the counter. If you replace hoses regularly, a shop account speeds up repeat builds and keeps your assemblies on record.

---

Hose down? We’ll get you back to work. Bring us the broken hose. We’ll build the replacement.

Call (626) 310-1626 · Get Directions 11605 Goldring Rd, Suite D, Arcadia, CA 91006